forum.group44.de

Fix the WG and have some aluminum end tanks welded on or go with a new custom IC. Did you ever get a new grill? I finally finished my grill this summer thanks to the "special" pictures you sent me about 2 years ago. Heres where you can see the pictures: http://forums.justfourrings.com/view...

Übersetzt aus dem Englischen; benutzt Google übersetzen. Vergib schlechte Übersetzung. Ich wollte meinen vorherigen Thread starten b / c Ich glaube, es war zu viel Verwirrung. So können sie gerade erhalten aus der sich gehen zu dieser Zeit (Thread von Motorgeek.com). Boxster S Non-Cailper auf eine 5...

I wanted to restart my previous thread b/c I think there was too much confusion(thread from Motorgeek.com) . So lets get it straight from the get go this time. Boxster Non-S Cailper onto a 5ktq is the goal. What I know so far: The RS2 bracket is the wrong bracket , but is a good starting point to us...

The goal of this project is to free up one switch slot so that I may use a blank cover plate to modify for a GPS mount (I believe this has been done before on a UrS4 on Quattroworld or Audiworld) The current switch plate configuration from left to right has the boost gauge taking up the first two sl...

Very nice, now the 5 cylinder sounds better? :D Sounds great. The 5 cylinder has a very distinct exhaust note. Almost sounds similar to a Dodge Viper. I would love to listen to Paul's (Custom Auto Craft) exhaust for the 200 10vt. That way I could compare the two exhaust systems. I know they were bo...

Some recent pictures of the 200.

The exhaust is installed. It is tighter than I'd like in a few places. Stebro exhaust with a hallow cat. Ur-Quattro seal rings were used along with stainless hardwear.

here are the pictures.

I would like to use A8 312x25mm rotors PN# 8E0 615 301 R
Porsche Boxster S Calipers PN# 996 351 425 11 and 996 351 426 11

I am just not sure if my bracket dimension are correct. (shown in the pdf file above)

Mario20v hat geschrieben:Maybee this will help you, but its in german.

http://mtsonline.mt.funpic.de/bremse.html

Or ask Karl S. via PM.

I could not find the user name of Karl S. Do you have the user name?

So I have some Big Reds on loan for my porsche carrier bracket project that I have approved for my ProE class at school. The project is for my 5ktq. Questions: Are RS2 brackets what I need? Are UrS4 strut hosing brake bracket holes the same as the 5ktq? (the brackets i got my dimensions from are a U...

Ignas.quattro hat geschrieben:This summer I hope there will be some major changes in the engine compartment as well

cool.

where did you end up sourcing the chrome trim for the front bumper from?

HI, maybe this site can help you! http://www.audinarren.de/Startseite.htm Look "Umbauten" on the left side, and then "Kühlergrill Umbauten". Good Luck! regards Olaf forgot to mention, I been there already. I am looking for a do it yourself (DIY) home built grill. but thanks anyw...

I have seen this "cool grill" time and again and I know to purchase one and have it shipped to the United States is out of the question because it is unqesstionably expensive. Does and one have pictures of making the grill with no rings? I want to build my own, I know it takes two grills, ...

OHHH NOOOO not a shopping cart!!!! The anti-Christ of car paint!

How much did you pay for it ? Here is a friend with a 100 S4 V8 Avant who wants to export it to Canada and we want to find a price for it. the 1995.5 in the USA was really just a 1996 in Europe. The 1996 was never officially imported to the USA (only a few were imported), that is why they are so ra...

Ignas.quattro hat geschrieben:
Ah yes I see them now. Very very tiny.

I am surprised that you cannot use your euro chrome trim?

Sorry ,what do you mean..?[/quote]


Why can you not use the trim that you use for your euro bumper?

Is the width of the trim too small? If so how much?

So the photos are sent as well :) Well , this could be possible , sending those chrome parts from the USA , but this will cost a lot , I mean A LOT :shock: Using staples(maybe not the right word) is hmm , using a little metal part between two plastic parts which you melt together , for a better con...

So the photos are sent as well :) Well , this could be possible , sending those chrome parts from the USA , but this will cost a lot , I mean A LOT :shock: Using staples(maybe not the right word) is hmm , using a little metal part between two plastic parts which you melt together , for a better con...

Ok , so now the front is almost OK , except for those chrome parts , which are not there... :roll: By the way , oldsklaudidub , please write me your email , because this email "sending via this forum" thing doesn't include attachments for full sized photos which I took yesterday , while p...

Does anyone know where the Talladega 200 is these days. Did Audi sell it to a private collector or did they scrap it for insurance reasons?

Hi, das oben is die Lichtmaschine, welche wohl aus Gewichtsgründen nach hinten "gewandert" ist. Wenn Du das meinst. Der Audi welcher in Nardo eingesetzt wurde, war/ist aber einer mit geraden Radläufen !. Oh man, einen gecrashten Imsa 90er zu sehen ist schon ein wenig hart. Interessant ist...

That is the communication antenna to the pit crew in the 200 TA. Why not mount it on the roof, two reasons; one drag, second it does not look cool 8) . Or are you talking about the alternator that is run off the drive shaft? The black "200" is the car that broke the Talladega speed record ...

I figured some may have an interest in some of these pictures. I am sure some of you have seen most of these but I am sure there are a few you all have not. Warning much of this is Type 44 stuff. Dont complain b/c T44's are... :armata: Enjoy :-D http://i133.photobucket.com/albums/q45/cmackfb/Audi%20...

and isnt he one ? :D ... i have no idea why someone would go on the street in black clothes with a black ski mask on his face :D ... dude :D ... I think I was making the compasion where someone wearing a black ski mask in public is sterotyped as a bank robber. The 200 TA is the ski mask and people ...

The car is 100% stock. It has every nut and bolt, not missing one piece. The car is a 9.5 out of 10 for condition. Has an amazing 73,000 miles (yes they can be had with less milegae) alot better than the ones with over 100k on them. *minus the wheels its 100% but i like the wheels :D * Had the car t...

No we do not have as stringent regulations.

think of like sterotypical profiling. For example, person dressed in all black with a black ski mask is a bank robber.

A hotrod or muscle car differs from a race car. They look close enough to a production car or are modified so little that they are not an issue (they are part of American pop culture). A race has that look where it looks like it is ment for the race track, wider tires, wider fenders, big air ducts, ...

Olli,

Any car with a wide body kit and looks as though it goes really fast is a police magnet in the USA.

Corey

Nice man. Audi should have built this as the ultimate 200 model! With a 10VT of course. :) Look at the rear door handles - wow... Are you now thinking of some wide body conversion to the "Wide Widow", Corey? :) Cheers, Olli As interesting as this car looks I can in no way have any desire ...

does anyone have more pictures of this Audi 200 "Trans Am". Seems to me it is a one off wide body to replicate a trans am car. I was told the car was on loan at the VW automuseum in 2008. <a href="http://s52.photobucket.com/albums/g39/wavemeister_2006/vw%20automuseum%202008/?action=vi...